Ideal for criterium racing or training on a repetitive course. Average speed, average cadence, time and distance for each lap is recorded and may be displayed. You may store up to 50 laps with this fine computer.Auto Sleep is a power saving feature that automatically shuts off the liquid crystal display, except for time, after one hour of non-use.Auto time assures you of the greatest possible accuracy for elapsed time and average speed functions. Auto time automatically starts and stops the timer when you start or stop riding.Extra functions include auto time, auto sleep and resettable odometer memory so you never lose those hard earned miles when changing the batteries.Cumulative time for all rides is stored up to 9,999 hours. Time functions include: 24 hour clock and time elapsed on your current ride, up to 10 hours.Speed reads up to 65 miles or 106 kilometers per hour. Cycling functions include: cadence (pedal RPM's), cumulative distance, trip distance, current, maximum and average speed in miles or kilometers per hour.Comes with a rear wheel and crank sensor kit ideal for use with a Wind Trainer.Computer head size is 1.5 inches (3.8 cm) wide by 2 and 1/4 inches (5.2 cm) tall.Current, total, maximum and average cadence can be displayed.Displays pedal revolutions per minute (cadence) for optimal training.The upper left is for speed functions, the upper right for cadence functions and the lower half for time, distance, max and average speed and lap funtions. The large,1 inch by 1 1/8 inch (2.54 cm by 2.90 cm) screen is divided into three sections.No-tools, high powered speed magnet fits bladed and round wire spokes. Adjustable handlebar mount fits normal and oversized bars up to 32 mm in diameter.An obstacle free transmission path is NOT required. The computer head should be placed at least 20cm (4 inches) away from the transmitter but no more than 100cm (40 inches) away.The arrow on the upper left hand corner of the transmitter must point towards the handlebar mounted computer. The distance between the notches is 2.75 inches (7cm) and is NOT adjustable. Both notches are marked by red arrows in the above photo. A spoke mounted magnet must pass by the notch on the rear arm. A crank arm magnet must pass by the notch on the forward arm.
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |